---
title: Cube Birdie Bird Amigurumi Pattern
description: A cute, free and super easy birdie pattern. Start with the basic cube shape and end up with a new adorable friend.
---

[Crafty Bunny Bun ](https://www.craftybunnybun.com)

# [Cube Birdie Bird Amigurumi Pattern](https://www.craftybunnybun.com/cube-birdy-bird-amigurumi-pattern)

 Written by [Crafty](https://www.craftybunnybun.com/author/crafty) | Nov 6, 2018 2:59:17 PM

A cute, free and super easy birdie pattern. Start with the basic cube shape and end up with a new adorable friend.

This pattern has <http://www.ravelry.com/badges/redirect?p=cube-birdie-bird> on Ravelry.

## Material

- 3mm crochet hook
- DK yarn in the color of choice
- DK yarn in yellow or orange for the beak and feet
- [8mm safety eyes](https://amzn.to/2JFJpOk)

If you are creating the small baby bird:

- 2mm crochet hook
- 4 ply/baby/fine yarn#
- [6mm safety eyes](https://amzn.to/2JFJpOk)

## Abbreviations (US)

- MC: magic circle
- 2-sc inc: 2 sc in next st (increase by 1)
- 3-sc inc: 3 sc in next st (increase by 2)
- sc2tog: 2 sc together (decrease by 1)
- sc3tog: 3 sc together (decrease by 2)
- sl st: Slip stitch
- ch: Chain

## Instructions

This pattern is made in a spiral of continuous rounds

First, I’ll start with the peak. Starting with it helps you determine the eye spacing on the body so the peak can fit between them. 

### Peak (make 1)

With the yellow/orange yarn:

| **Row #** | **Instructions** | **Sts** |
| --- | --- | --- |
| R1 | 6-sc MC | 6 |
| R2 | 2-sc inc, 2-hdc inc, 2-sc inc × 2, 2-hdc inc, 2-sc inc, sl st | 12 |

Finish off leaving a long tail.

The resulting shape is an oval. Fold the oval on itself to create the peak, hide the magic circle yarn tail inside the folded part. Use a sewing needle to sew along the folded side to press the two sides together as per the pictures below: 

 

 

 

 

### Body (make 1) 

| **Row #** | **Instructions** | **Sts** |
| --- | --- | --- |
| R1 | 4-sc MC | 4 |
| R2 | 3-sc inc × 4 | 12 |
| R3 | sc, 3-sc inc, [sc × 2, 3-sc inc] × 3, sc | 20 |
| R4 | sc × 2, 3-sc inc, [sc × 4, 3-sc inc] × 3, sc × 2 | 28 |
| R5 | sc × 3, 3-sc inc, [sc × 6, 3-sc inc] × 3, sc × 3 | 36 |
| R6 | sc × 4, 3-sc inc, [sc × 8, 3-sc inc] × 3, sc × 4 | 44 |
| R7 | sc × 5, sc2tog, [sc × 9, sc2tog] × 3, sc × 4 | 40 |
| R8-14 | sc × 40 | 40 |
| R15 | sc × 4, sc3tog, [sc × 7, sc3tog] × 3, sc × 3 | 32 |
| R16 | sc × 3, sc3tog, [sc × 5, sc3tog] × 3, sc × 2 | 24 |
| Stuff well. Place the eyes between R11 and R12. Place them about 6 stitch gaps apart. See pictures for reference. There is going to be a peak in the middle so leave room for that. |  |  |
| R17 | sc × 2, sc3tog, [sc × 3, sc3tog] × 3, sc | 16 |
| R18 | sc, sc3tog, [sc, sc3tog] × 3 | 8 |

Finish off, sew the ends together to close the gap.

### Wings (make 2)

| **Row #** | **Instructions** | **Sts** |
| --- | --- | --- |
| R1 | 6-sc MC | 6 |
| R2 | 2-sc inc × 6 | 12 |
| R3 | HDC × 2, ch | - |

Leave long tail. Do not stuff

 

### Feet (make 2) 

| **Row #** | **Instructions** | **Sts** |
| --- | --- | --- |
| R1 | 5-sc MC | 5 |
| R2 | 2-sc inc × 5 | 10 |
| R3-7 | sc × 10 | 10 |

Leave long tail. Do not stuff

Sew the end of the each feet together to close it off flat as per the picture below: 

## Assembly

 

Using a sewing needle:

- Attach the peak between R12 and R13. Start by attaching each corner as indicated by the pins in the pictures then attach the middle of the peak.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

- Attach the wings to the side of the bird on R10, R11 and R12. Let the outer part of the wing be detached as per the picture.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

- Attach the little feet at the bottom of the bird. For a cuter effect space them apart and have them point a little outward to each side rather than just straight to the front see the following pictures for reference

 

 

 

 

 

[View full post](https://www.craftybunnybun.com/cube-birdy-bird-amigurumi-pattern)

```json
{
  "@context" : "http://schema.org",
  "@type" : "BlogPosting",
  "author" : {
    "@type" : "Person",
    "name" : "Crafty"
  },
  "dateModified" : "2019-03-18T12:27:58.199Z",
  "datePublished" : "2018-11-06T14:59:17Z",
  "headline" : "Cube Birdie Bird Amigurumi Pattern",
  "image" : {
    "@type" : "ImageObject",
    "height" : 998,
    "url" : "https://cdn2.hubspot.net/hubfs/5008706/Patterns/Cube%20Birdie%20Bird-993976-edited.jpeg",
    "width" : 1000
  },
  "mainEntityOfPage" : "https://www.craftybunnybun.com/cube-birdy-bird-amigurumi-pattern",
  "publisher" : {
    "@type" : "Organization",
    "logo" : {
      "@type" : "ImageObject",
      "height" : 60,
      "url" : "/hs/hsstatic/content_shared_assets/static-1.4092/img/default-amp-logo.png",
      "width" : 60
    },
    "name" : "Crafty Bunny Bun"
  }
}
```